Blog

An Exhaustive Guide to Solar-Powered Street Lights

According to most estimates, the total number of streetlights in the U.S. ranges from 45 to 55 million. Imagine that staggering figure! Now, imagine if all these lights operated on solar energy without harming the environment and saving huge costs.

While solar street light technology is not yet widespread, it is rapidly advancing and becoming more accessible. But what makes solar-powered street lights so appealing to American citizens? Let’s explore solar-powered street lights in more detail, including the pros and cons and intricacies of solar street light installation.

What Makes Solar-Powered Street Lights Special?

A solar street lamp is an autonomous lighting device powered by solar energy. Its construction consists of:

  • Small solar panels that convert sunlight into electricity
  • A battery that stores the electricity generated during the day
  • An LED luminaire needed to use the accumulated energy for illumination

Commercial solar-powered street lights are equipped with waterproof housings that protect internal components from rain, wind, and dust, ensuring durability and uninterrupted operation. Thanks to such housing, street light solar works for years without requiring frequent maintenance or repair.

The principle of operation of a solar lantern is quite simple and similar to that of a regular flashlight, but there is one significant difference. Instead of using batteries that discharge over time and require replacement, the solar lantern has infinite resources.

Naturally, you may argue that solar-powered street lights are useless during the night when moonlight prevails in the sky. But let’s take a moment and get into how solar-powered LED street lights work.

During the day, the solar panel converts sunlight into electricity, which charges the battery. At night, the battery is used to power the LED. Thus, solar-powered LED street lights work continuously for both day and night and many years.

If we look back a bit, the first solar panel street lights appeared in the early 1980s. Their emergence was primarily driven by the need for lighting in remote areas where laying power lines was economically unfeasible or technically challenging. But now everything has changed. And now they are on bike paths, highways, parks, private territories, stairs, courtyards, and bus stops. The list is endless. Many advantages for city and state residents and the country as a whole explain the growing popularity of LED solar street lights.

Sustainable Advantages of Solar-Powered Street Lights

If we’re touching upon the benefits of a solar-powered street lamp, let’s discuss the most common ones.

Resilience of Solar Street Lighting to External Challenges

Solar-powered street lights are a perfect solution for illuminating streets in the USA. They do not require a connection to the electrical grid as they are powered by solar batteries that store energy during the day. This makes them ideal for installation in areas without access to a centralized power grid or where wiring proves costly and complex.

Essentially, this advantage has persisted since the 1980s, as there are still issues with uninterrupted electricity supply in some states due to extreme weather conditions or outdated electrical systems.

Source: EIA

Environmental Benefits of Solar-Powered Street Lights

A solar energy street light utilizes renewable energy, reducing dependence on traditional energy sources such as coal or oil. This contributes to preserving natural resources and helps reduce the environmental impact of our production and energy consumption. Additionally, as a result, the states will be less energy-dependent.

It’s worth noting that solar lighting provides softer and diffused light, reducing light pollution and its negative impact on ecosystems and human health.

Economic Benefits of Solar-Powered Street Lights

From an economic standpoint, the efficiency of commercial or industrial solar street lights will be realized in the long term. Although the initial installation costs may be high, they are offset by savings on electricity (as they do not require connection to the power grid) and maintenance costs.

Moreover, the development and implementation of solar street lights will positively impact the creation of new jobs in the production and installing solar outdoor street lights.

Overall, even one solar street light is a significant step towards sustainable development and environmental conservation in the USA. Hence, solar street lights will soon become important to American infrastructure.

Looking for the best solar-powered street lights in your city? Get your free solar quote now.

GET SOLAR QUOTE

Factors Affecting the Efficiency of Solar-Powered Street Lights

The efficiency of solar street lights outdoors is evident in aiding the environment and stabilizing the respective sector, but in less obvious ways. For example, they reduce the risk of accidents and crime on the streets by providing adequate lighting during the dark hours in remote and disadvantaged areas. Thus, solar lighting improves residents’ quality of life, ensuring safety and comfort.

Several factors influence the efficiency of solar LED street lights, such as:

 

Location and climatic conditions The presence of sunlight, cloudiness, precipitation, and temperature significantly affect the collection of solar energy and, consequently, the productivity of solar panels.
Quality of solar panels Choosing high-efficiency panels with a high solar energy conversion rate into electricity can significantly increase the system’s productivity. For example, monocrystalline panels have the highest efficiency (up to 22%) but are more expensive compared to polycrystalline panels, which have an efficiency of up to 18%.
Size and capacity of the battery The batteries’ size and charge level determine the duration of operation of the lamps at night or in conditions of limited solar energy. Lead-acid batteries have a short service life (3-5 years) and low efficiency (80%), while lithium-ion batteries can last up to 10 years and have an efficiency of up to 95%.
Efficiency of LEDs Using high-efficiency LEDs, i.e., those that produce more lumens of light per watt of power, allows for adequate lighting with minimal energy consumption.
Functionality of the charge controller The controller manages the battery charging and discharging process to extend its service life. Some controllers are equipped with additional features such as motion sensors, brightness adjustment, or timers for programming the operating time of the lamp.

 

In summary, the efficiency of outdoor solar street lights depends on various factors. Only the correct combination of these factors will contribute to increasing the productivity and longevity of solar streetlights. For example, selecting the right size of the panel and lamp for the specific location of the light will help maximize the use of available energy. It is essential to take these considerations into account.

Optimizing Solar-Powered Street Lights Installations for Efficiency

Installation of the best solar street light is not just about placing lamps on poles. It’s a meticulous process that involves careful planning and consideration of various factors, which turn night into a bright day through the combination of solar energy and LED light.

So, what factors directly impact solar LED street lights’ maximum efficiency and effectiveness?
Location selection
  • Solar panels should be placed in an area with maximum direct sunlight access, avoiding shading from trees, buildings, or other objects.
  • Mounting the lamps at an optimal height to ensure uniform illumination and minimize glare.
Angle adjustment
  • Positioning solar panels at the correct angle and direction for maximum sunlight collection.
  • Adjusting the tilt angle considering the geographical location for optimal performance. An angle of approximately 45 degrees is considered ideal, given a latitude value of around 50 degrees.
Component specifications for solar-powered LED street lights
  • Choosing panels with high efficiency for maximum conversion of sunlight into electricity and lamps with efficient LEDs and quality optical components.
  • Selecting a battery with sufficient capacity to power the lamp throughout the night, with a long service life and high efficiency (such as lithium-ion).
  • Opting for a charge controller with a wide range of operating voltages and additional features.
Maintenance and monitoring
  • Establishing a regular maintenance schedule to clean solar panels, check wire connections, and promptly replace faulty components.
  • Implementing a monitoring system to track energy production, lighting performance, and system status, utilizing collected data for system optimization.

By following the above advice and collaborating only with a reliable solar street light manufacturer, you ensure an efficient and long-lasting street solar light system.

Commercial or Municipal Solar Street Lights: What’s the Best Option?

In many situations, street lighting with the brightest solar street lights is a justified investment, especially in areas with abundant sunlight and high electricity tariffs. It’s a bold step towards energy independence, long-term savings, and positive environmental impact. However, conducting a detailed technical-economic analysis and profitability assessment is critically important to determine if such an option is optimal for a specific project.

However, commercial solar-powered street lights are not the only solar option. What you can do yourself is install solar lights around the perimeter of your own home or even mount solar panels on the roof. The SolarCC team has taken care to ensure that you don’t get lost in numerous internet articles but can quickly receive an individual solar proposal.

Feeling compelled to install solar-powered street lights? Get your free solar quote right away!

GET SOLAR QUOTE